Specifications

7193 Owner’s Guide Chapter 4: Diagnostics
August 1998 31
2. Set the switches to the settings in the table.
Switch 1 Switch 2 Switch 3 Switch 4 Switch 5 Switch 6
On Off Off On Off Off
3. Turn the printer back on to enter the settings into the EEROM and disable the Data
Scope Mode.
The On Line light (green) blinks.
4. Turn the printer off and set the DIP switches to the former settings.
DIP switch 1 must be Off to return the printer to the on-line mode.
5. Turn the printer back on.
The printer is on-line and can communicate normally with the host computer.
Testing Receipt Printing
This function allows you to select various print tests. You can also test the printing by
following the procedures in “Testing the Printer” in chapter 2 without having to change
the DIP switches. A sample test printout is in chapter 2.
Note: The operator panel may differ depending on the model. To turn the printer on or
off, (on-line or off-line), use a paper clip or other pointed object to depress the plunger (in
place of the On Line button) on models with that item.
Caution: The DIP switches are pre-set at the factory and should generally not be changed.
If you must change them, do so carefully to avoid changing other functions.
1. Turn the printer off.
2. Turn the printer over and note what the current DIP switch settings are.
3. Set the switches for the test you want.
Switch 1 Switch 2 Switch 3 Switch 4 Switch 5 Switch 6 Option
On Off Off Off Off Off Sample Receipt
On Off Off Off Off On Continuous Sample Receipt
On Off Off Off On Off Character Sets
On Off Off Off On On Continuous Character Sets
4. Turn the printer back on to enter the settings into the EEROM.
The On Line light (green) blinks. If either the continuous sample receipt or the
continuous character sets option is selected, the printer will automatically begin
printing.
5. Press the Paper Feed button to print the sample receipt or the character sets (whichever
was selected).
6. Press the Paper Feed button or turn the printer off to stop the test.
7. Turn the printer off and set the DIP switches to the former settings.
DIP switch 1 must be Off to return the printer to the on-line mode.
8. Turn the printer back on.