Specifications

7193 Owner’s Guide Chapter 4: Diagnostics
August 1998 29
Switch 1 Switch 2 Switch 3 Switch 4 Switch 5 Switch 6 Cut Distance Value
On On Off Off Off Off 0
On On Off Off Off On 1
On On Off Off On Off 2
On On Off Off On On 3
On On Off On Off Off 4
On On Off On Off On 5 (Default)
On On Off On On Off 6
On On Off On On On 7
4. Turn the printer back on to enter the settings into the EEROM.
The On Line light (green) blinks.
5. Turn the printer off and set the DIP switches to the former settings.
DIP switch 1 must be Off to return the printer to the on-line mode.
6. Turn the printer back on.
Ignoring/Using the Carriage Return
This function allows the printer to ignore or use the Carriage Return (hexadecimal 0D)
command depending on the application. Some applications expect the command to be
ignored while others use the command as a print command.
Note: The operator panel may differ depending on the model. To turn the printer on or
off, (on-line or off-line), use a paper clip or other pointed object to depress the plunger (in
place of the On Line button) on models with that item.
Caution: The DIP switches are pre-set at the factory and should generally not be changed.
If you must change them, do so carefully to avoid changing other functions.
1. Turn the printer off.
2. Turn the printer over and note what the current DIP switch settings are.
3. Set the switches for ignoring or using the Carriage Return command.
Switch 1 Switch 2 Switch 3 Switch 4 Switch 5 Switch 6 Option
On Off On On Off On Ignore CR (Hex 0D)
On Off On On Off Off Use CR (Hex 0D) as Print
Command (Default)*
*Emulates the NCR 7150™ printer.
4. Turn the printer back on to enter the settings into the EEROM.
The On Line light (green) blinks.
5. Turn the printer off and set the DIP switches to the former settings.