Specifications

7193 Owner’s Guide Chapter 2: Setting Up the Printer
August 1998 11
Turning On the Printer
Note: The operator panel may differ from the standard version (left) depending on the
model. On models matching the alternate version (right), use a paper clip or pointed object
to press the plunger to put the printer on- or off-line.
1. Press the On Line button (or plunger) to put the printer on-line.
The printer goes through a self-test routine to ensure everything is working, then
“beeps.” The On Line light (green) comes on indicating the printer is on-line. If the On
Line light does not come on, or either the On Line light or Paper Out light flashes, see
the Owner's Guide for more information.
2. Press the On Line button (or plunger) again to put the printer off-line.
When the printer has completed its “startup” cycle it is ready to receive data. If the Paper
Out light flashes, see “Chapter 3: Solving Problems.”
Note: The printer receives power when the power supply is on even if the printer is off-
line. To completely remove power, press the On Line button (or plunger) to put the printer
off-line (On Line light is off), then unplug the power supply from the outlet.