Specifications

Index 7193 Owner’s Guide
August 199892
parameters, 41
protocol, 39
technical specifications, 40
Partial cut distance
setting, 28
Pitch of characters
15.2 cpi, 85
19 cpi, 85
Power
turning on the printer, 11
Power cable
connecting, 9
connector and pin assignments, 36, 40
Power connector, 36, 40
Power requirements, 81
Power supply
mounting on wall, 19
ordering, 3
Print density
receipt, 84
Print problems, 23
Print speed, 34
Print test, 15
Print timing, 34
Print zones, 83
printer operating hours
number of, 32
Printhead
over/under temperature, 32
print density, 84
resistance, 27
thermal, 2
Printhead resistance
setting, 27
Printhead, thermal
cleaning, 4
Printing, continuous
limitations of, 84
Problems, 21
knife failure, 22
no power to printer, 23
operator panel lights, 21
paper jams, 22
paper out, 22
power voltages out of range, 23
print is light or spotty, 23
printhead over/under temperature, 22
Protocol, parallel, 39
Protocol, RS-232C
DTR/DSR, 35
XON/XOFF, 35
—R—
Receipt cover
open, 32
receipt printing
test, 31
Reliability, 81
Removing packing material, 5
Repacking printer, 6
Rotated printing, 59
RS-232C interface, 34
cash drawer connector, 36
communication connector, 36
parameters, 37
setting data buffer options, 26
setting data error options, 26
technical specifications, 36
XON/XOFF protocol, 35
—S—
Service
contacting service representative, 23
Setting switches, 6
parallel parameters, 41
RS-232C parameters, 37
Setup mode. See Level 1 diagnostics
Specifications, 82
parallel interface, 40
RS-232C interface, 36
Speed, 34
Standard pitch sample characters, 85
Supplies
cash drawer, 3
communication cables, 3
kits, 17, 19
paper, 3
power cord, 3
power supply, 3
shipped in box, 5
shipped separately, 5
wall-mount kit, power supply, 19
Switch settings, 6
parallel parameters, 41
RS-232C parameters, 37