Specifications

7193 Owner’s Guide Commands
May 1996
Set or Cancel Rotated Characters Clockwise
Rotates characters 90 degrees clockwise. It remains in effect until the printer is
reset or until a Clear Printer (10) or Rotated Print (1B 12) command is received. It
is valid only at the beginning of a line. It cannot be used with non-rotated print
on the same line. See “Summary of Rotated Printing” on the next page.
Hex Decimal ASCII Value of
n
Default
1B 56 n 27 86 n ESC V n 0 = Cancel
1 = Set
0
Set or Cancel Upside-Down Characters
Prints upside-down characters. It is valid only at the beginning of a line. The
character order is inverted in the buffer so text is readable. It cannot be used with
right-side up characters on the same line. The Rotated Print (1B 12) command
cancels this command. Only bit 0 is used. Bits 1-7 are not used. See “Summary of
Rotated Printing” on the next page.
Hex Decimal ASCII Value of
n
Default
1B 7B n 27 123 n ESC { n 0 = Cancel
1 = Set
0