Specifications

7193 Owner’s Guide Commands
May 1996
Align Character Positions
Specifies the alignment of characters, graphics, logos, and bar codes (see table). It
is valid only at the beginning of a line.
Hex Decimal ASCII Value of
n
Default
1B 61 n 27 97 n ESC a n 0 (Left Aligned)
1 (Center Aligned)
2 (Right Aligned)
0
Select Sensors to Stop Printing
This command is not implemented and is ignored if received.
Hex Decimal ASCII
1B 63 34 n 27 99 52 n ESC c 4 n
Enable or Disable Panel Switch
Toggles the panel switches on and off. Functions that require the panel switches
cannot be used when the panel switches are disabled with this command.
Hex Decimal ASCII Value of
n
Default
1B 63 35 n 27 99 53 n ESC c 5 n 0 = Enable
1 = Disable
0
Print and Feed
n
Lines
Prints one line from the buffer and feeds paper n lines at the current line height.
Hex Decimal ASCII Value of
n
1B 64 n 27 100 n ESC d n 1-255 (0 interpreted as 1)