Specifications

Commands 7193 Owner’s Guide
May 199666
Full Knife Cut
This command is implemented the same as Partial Knife Cut (1A/1B 6D).
Hex Decimal ASCII
19
1B 69
25
27 105
EM
ESC i
Partial Knife Cut
Partially cuts the receipt, leaving .20 inch (5 mm) of paper. The length of the cut
can be changed through the DIP switches. See “Setting Partial Cut Distance” in
the “Diagnostics” chapter. The cut edge is 108 dot rows or .71 inch (18 mm)
above the print station. It is valid only at the beginning of a line.
Hex Decimal ASCII
1A
1B 6D
26
27 109
SUB
ESC m
Generate Tone
Generates an audible tone.
Hex Decimal ASCII
1B 07 27 7 ESC BEL
Set Column
Prints the first character of the next print line in column n. It must be sent for
each line not printed at column one. The value of n is set to one after each line. It
cannot be used with Single- or Double-Density graphics.
Hex Decimal ASCII Value of
n
1B 14 n 27 20 n ESC DC4 n 1-44 (Standard Pitch)
1-56 (Compressed pitch)