Specifications

Commands 7193 Owner’s Guide
May 199664
Carriage Return
Prints one line from the buffer and feeds paper one line. The printer can be set
through the DIP switches to ignore or use this command. Some applications
expect the command to be ignored while others use it as print command. See
“Ignoring/Using the Carriage Return” in the “Diagnostics” chapter for more
information.
Hex Decimal ASCII
0D 13 CR
Clear Printer
Clears the print line buffer without printing and sets the printer to the following
condition:
• Double-Wide (12) command is cancelled
• Line Spacing, Pitch, and User-Defined Character Sets are maintained at
current selections (RAM is not affected)
• Single-Wide, Single-High, Non-Rotated, and Left-Aligned characters are set
• Printer is restarted and error status is cleared in a fault condition
• Returns paper exhaust to the paper status line if an alternate status has been
requested (Parallel interface only)
Hex Decimal ASCII
10 16 DLE
Feed n Print Lines
Feeds the paper n lines at the current line height without printing.
Hex Decimal ASCII Value of n
14 n 20 n DC4 n 0-255