Specifications

Software Commands Model 181 Series 180 Programmer’s Guide
TransAct Technologies
Page 5 - 44 09/26/2000
ESC ‘
n
[I]
[Name] Copy user defined storage buffers
[Format] ASCII ESC ‘
n
Hex 1B 27
n
Decimal 27 39
n
[Description] Copies data between user defined RAM buffer and the non-volatile
eeprom buffer.
When the LSB of
n
is 0,
 The content of the user defined ram buffer (containing user defined bit-image or
character set) is copied into the non-volatile eeprom storage buffer. The printer will go
busy and remain in that state momentarily while the write is taking place.
 Data in the eeprom storage buffer will remain intact indefinitely or until the data is
rewritten with the ESC ‘ command.
When the LSB of
n
is 1,
 The content of the non-volatile eeprom storage buffer (containing user defined bit-
image or character set) is copied into the user defined ram buffer.
 Data in the RAM storage buffer will remain intact until it is cleared with the ESC @
command or the printer is powered off.
 User defined bit-images or character sets stored in the RAM or non-volatile eeprom
buffer can be accessed with the GS / and ESC % commands.
GS E
n
[E*]
[Name] Set head energizing time
[Format] ASCII GS E
n
Hex 10 45
n
Decimal 29 69
n
[Range] 0 
n
 255
[Usage] *Epson TM-T8x emulation mode only.
[Description] LSB = 1 normal print mode is selected.
LSB = 0 copy print mode is selected.