Specifications

Software Commands Model 181 Series 180 Programmer’s Guide
TransAct Technologies
Page 5 - 42 09/26/2000
[Description] Clears the print line buffer without printing and sets the printer to
following condition:
 Double-Wide (12 dec) command is canceled.
 Line Spacing, Pitch, and User-Defined Character Sets and bit-images in RAM are
unaffected.
 Single-Wide, Single-High, Non-Rotated, and Left-Aligned characters are set.
 Printer is restarted and error status is cleared in a fault condition.
 Returns paper exhaust to the paper status if an alternate status has been requested using
the ESC u command. (Parallel interface only)
GS I
n
[E]
[Name] Transmit printer ID
[Format] ASCII GS I
n
Hex 1D 49
n
Decimal 29 73
n
[Range] 1 
n
3, 49 
n
51
[Description] Transmits the printer ID specified by
n
as follows:
n
Printer ID Specification ID (hex)
1, 49 Printer model ID Epson TM-T88/T88P
Epson TM-T85
Axiohm 7193
20
08
71
2, 50 Type ID See Table below.
3, 51 ROM version ID not implemented, returns zero.
n
= 2, Type ID
Bit Off/On Hex Decimal Function
0 Off 00 0 Not used. Fixed to Off.
1 On 02 2 Auto-cutter equipped.
2, 3 - - - Undefined.
4 Off 00 0 Not used. Fixed to Off.
5, 6 - - - Undefined.
7 Off 00 0 Not used. Fixed to Off.
ESC p m
t1 t2
[EAB]
[Name] Generate pulse
[Format] ASCII ESC p
mt1t2
Hex 1B 70
mt1t2
Decimal 27 112
mtl t2
[Range]
m
= 0, 1, 48, 49
0 
t1
 255, 0 
t2
 255
[
Epson TM -300
] m= 0 or 1 only.
[Description] Outputs the pulse specified by
t1
and
t2
to connector pin m as follows:
Pulse ON time = (
t1
* 2ms) , Pulse OFF time = (
t2
* 2ms)