Specifications

Software Commands Model 181 Series 180 Programmer’s Guide
TransAct Technologies
Page 5 - 40 09/26/2000
GS _ _ [I]
[Name] Delete startup macro definition
[Format] ASCII GS _
Hex 1D 5F
Decimal 29 95
[Description] Deletes a startup macro definition previously created by the GS ^
command.
 If a startup macro was not previously defined, this command is ignored.
 If a startup macro was previously defined, the macro definition is deleted and the space
it occupied is returned to the eeprom buffer.
 NOTE: Any user defined character sets or bit-images will be erased and must be
redefined after deleting the startup macro.
Mechanism Control Commands
1
GS V
m
2
GS V
m n
[E]
[Name] Select cut mode and cut paper
[Format]
1
ASCII GS V
m
Hex 1D 56
m
Decimal 29 86
m
2
ASCII GS V
mn
Hex 1D 56
mn
Decimal 29 86
mn
[Range]
1
m
= 1, 49
2
m
= 65, 66, 0 
n
255
[Description] Selects a mode for cutting paper and executes paper cutting. The value of
m selects the mode as follows:
m
Print mode
1, 49 Partial cut
65, 66
Feeds paper (cutting position + (
n
 (vertical motion unit)]), and
performs a partial cut.
ESC i [EA]
[Name] Partial Knife Cut
[Format] ASCII ESC i
Hex 1B 69
Decimal 27 105
[Description] Performs a partial knife cut.