Specifications

Software Commands Model 181 Series 180 Programmer’s Guide
TransAct Technologies
Page 5 - 38 09/26/2000
GS H
n
[EA]
[Name] Select printing position of HRI characters
[Format] ASCII GS H
n
Hex 1D 48
n
Decimal 29 72
n
[Range] 0 
n
 3, 48 
n
 51
[Description] Selects the printing position of HRI characters when printing a bar code.
n
selects the printing position as follows:
n
Printing position
0, 48 Not printed.
1, 49 Above bar code.
2, 50 Below bar code.
3, 51 Both above and below the bar code.
 HRI indicates Human Readable Interpretation.
GS f
n
[E]
[Name] Select font for Human Readable Interpretation (HRI) characters
[Format] ASCII GS f
n
Hex 1D 66
n
Decimal 29 102
n
[Range]
n
= 0, 1, 48, 49
[Description] Selects a font for the HRI characters used when printing a bar code.
n
selects a font from the following table:
n
Font
0, 48
Font A (13  24)
1, 49
Font B (10  24)
Macro Function Commands
GS : [E]
[Name] Start/end macro definition
[Format] ASCII GS :
Hex 1D 3A
Decimal 29 58
[Description] Starts or ends macro definition.
 Macro definition starts when this command is received during normal operation and
ends when it is received during the macro definition.
 The macro definition can contain up to 2048 bytes. If the definition exceeds this
value, the excess data is not stored.