Specifications
Programmer’s Guide Model 181 Series 180 Software Commands
TransAct Technologies
09/26/2000 Page 5 - 37
m
Bar Code System Number of Characters Remarks
2
65 UPC-A
11
k
12 48
d
57
2
66 UPC-E
11
k
12 48
d
57
2
67 JAN13 (EAN 13)
12
k
13 48
d
57
2
68 JAN 8 (EAN 8)
7
k
8 48
d
57
2
69 CODE39
1
n
255 48
d
57, 65
d
90
d
= 32, 36, 37, 43, 45, 46,
47
2
70 ITF
1
n
255
(even number)
48
d
57
2
71 CODABAR
1
n
255 48
d
57, 65
d
68
d
= 32, 36, 37, 43, 45, 46,
47, 58
2
72 CODE93
1
n
255 0
d
127
2
73 CODE128
2
n
255 0
d
127
[Description for
1
]
d
indicates the character code to be printed.
A NULL (00 Hex) character ends the bar code definition.
[Description for
2
]
n
indicates the number of bytes of bar code data to be processed immediately following
n
.
d
indicates the character code to be printed.
The following apply to both GS
k m d1...dk
NUL and GS
k m n d1...dn
:
If the horizontal width exceeds the printing area, the printer only feeds the paper.
These commands feed as much paper as necessary to print the bar code according to
the GS h command.
These commands are enabled only when no data exists in the print buffer. When data
does exist in the print buffer, the printer processes the data following
m
as normal data.
After printing a bar code, the print position is set the beginning of the line.
These commands are not effected by print modes (emphasized, underline, character
size...), except for upside-down mode.