Specifications

Programmer’s Guide Model 181 Series 180 Software Commands
TransAct Technologies
09/26/2000 Page 5 - 35
Bit Status 0 Signifies
0 Receipt Paper Present
1 Receipt Cover Closed
2 Receipt Paper Present
3Knife OK
4 Not Used
5 Printhead OK
6 Input Voltage OK
7 Not Used
Bar Code Commands
GS h
n
[EA]
[Name] Set bar code height
[Format] ASCII GS h
n
Hex 1D 68
n
Decimal 29 104
n
[Range] 1 
n
 255
[Default]
[
Epson TM-T8x
] 0.90 inches high
[
Axiohm 7193
]1.06 inches high
[Description] Sets the height of the bar code.
 Bar code height is set to [
n
/180] inches in Epson emulation mode.
 Bar code height is set to [
n
/152] inches for Axiohm emulation mode.
GS w n [EA]
[Name] Set bar code width
[Format] ASCII GS w
n
Hex 1D 77
n
Decimal 29 119
n
[Range] 1 
n
 6
[Default]
n
= 3
[Description] Set the horizontal side of the bar code.
n
specifies the bar code width as
follows: