Specifications

Programmer’s Guide Model 181 Series 180 Software Commands
TransAct Technologies
09/26/2000 Page 5 - 15
ESC !
n
[EAB]
[Name] Select print mode(s)
[Format] ASCII ESC !
n
Hex 1B 21
n
Decimal 27 33
n
[Range] 0
n
255
[
Epson TM -300
] Bit 3 underfined.
[Description] Selects print mode(s) using n as follows:
Bit Off/On Hex Decimal Function
0 Off 00 0 Character font A (13 × 24)
On 01 1 Character font B (10 × 24).
1, 2 - - - Undefined.
3 Off 00 0 Emphasized mode not selected.
On 08 8 Emphasized mode selected.
4 Off 00 0 Double-height mode not selected.
On 10 16 Double-height mode selected.
5 Off 00 0 Double-width mode not selected.
On 20 32 Double-width mode selected.
6 - - - Undefined.
7 Off 00 0 Underline mode not selected.
On 80 128 Underline mode selected.
Determine the values of
n
by adding the values of all the characteristics you want to
select.
ESC -
n
[E]
[Name] Turn underline mode on/off
[Format] ASCII ESC -
n
Hex 1B 2D
n
Decimal 27 45
n
[Range] 0
n
2, 48
n
50
[Description] Turns underline mode on or off, based on the following
values of
n
:
n
Function
0, 48 Turns off underline mode
1, 49 Turns on underline mode (2-dots thick)
2, 50 Turns on underline mode (2-dots thick)