Specifications

Programmer’s Guide Model 181 Series 180 Software Commands
TransAct Technologies
09/26/2000 Page 5 - 7
Print and Feed Commands
LF [EAB]
[Name] Print and line feed
[Format] ASCII LF
Hex 0A
Decimal 10
[Description] Prints the data in the print buffer and feeds one line based
on the current line spacing.
ETB [A]
[Name] Print
[Format] ASCII ETB
Hex 17
Decimal 23
[Description] Prints one line from the buffer and feeds paper one line at the current line
height (functions same as LF command).
CR [EAB]
[Name] Print and carriage return
[Format] ASCII CR
Hex 0D
Decimal 13
[Default]
[
Epson TM-T8x, Epsom TM-300
] CR ignored.
[
Axiohm 7193
]Functions same as LF.
[Description] The table below describes the operation of the LF command based upon
its default setting in the
Configuration Mode
(
Chapter 1
):
Paper Automatic line feed enabled Automatic line feed disabled
Paper roll
Functions as same as LF
Ignored
ESC J
n
[EA]
[Name] Print and feed paper
[Format] ASCII ESC J
n
Hex 1B 4A
n
Decimal 27 74
n
[Range] 0 
n
 255
[Description] Prints the data in the print buffer and feeds the paper [
n
×
vertical motion unit].
[Epson 300B] Prints the data in the print buffer and feeds the paper [
n
× 1/144 in]