Specifications

Software Commands Model 181 Series 180 Programmer’s Guide
TransAct Technologies
Page 5 - 4 09/26/2000
Panel Button Commands
Command Name Page
Number
ESC c 5
Enable/disable panel buttons 5-19
Paper Sensor Commands
Command Name Page
Number
ESC c 3
Select paper sensor(s) to output paper end signals 5-19
ESC c 4
Select paper sensor(s) to stop printing 5-20
Print Position Commands
Command Name Page
Number
ESC $
Set absolute print position 5-20
ESC \
Set relative print position 5-20
ESC a
Select justification 5-21
HT
Horizontal tab 5-21
ESC D
Set horizontal tab positions 5-21
GS L
Set left margin 5-22
GS W
Set printing area width 5-22
ESC DC4
Set column 5-22
Bit-image Commands
Command Name Page
Number
ESC *
Select bit-image mode 5-23
ESC K
Select 8-dot single-density bit-image mode 5-24
ESC L
Select 8-dot double-density bit-image mode 5-24
ESC Y
Select 8-dot double-density bit-image mode 5-25
GS *
Define downloaded bit-image in the RAM buffer 5-25
GS /
Print downloaded/stored bit-image 5-26