Specifications

Programmer’s Guide Model 181 Series 180 Software Commands
TransAct Technologies
09/26/2000 Page 5 - 3
Supported Commands
Print and Feed Commands
Command Name Page
Number
LF
Print and line feed 5-7
CR
Print and carriage return 5-7
ESC J
Print and feed paper 5-7
ESC d
Print and feed
n
lines 5-8
DC4
Feed
n
print lines 5-8
NAK
Feed
n
Dot Rows 5-8
ETB
Print 5-7
Line Spacing Commands
Command Name Page
Number
ESC 2
Select default line spacing 5-8
ESC 3
Set line spacing 5-8
SYN
Add
n
extra dot rows 5-9
Character Commands
Command Name Page
Number
ESC SP
Set right-side character spacing 5-9
ESC %
Select/cancel user-defined character sets 5-10
ESC &
Define user-defined characters 5-10
ESC ?
Cancel user-defined characters 5-11
ESC R
Select an international character set 5-12
ESC [ T
Select character code table 5-13
ESC ^ n
Print control character 5-14
ESC t
Select character code table 5-14
ESC !
Select print mode(s) 5-15
ESC -
Turn underline mode on/off 5-15
ESC E
Turn emphasized mode on/off 5-16
ESC G
Turn double-strike mode on/off 5-16
ESC {
Turn upside-down printing mode on/off 5-16
ESC V
Turn 90
0
rotation mode on/off 5-17
ESC DC2
Turn 90
0
counter-clockwise rotation mode on/off 5-17
GS !
Select character size 5-17
GS B
Turn white/black reverse printing mode on/off 5-18
DC2
Select double-wide characters 5-18
DC3
Select single-wide characters 5-18
ESC SYN
Select pitch (column width) 5-18