Specifications

General Information Model 181 Series 180 Programmer’s Guide
TransAct Technologies
Page 3 -6 09/26/2000
INSTALLING OR REPLACING THE PAPER ROLL
Note:
Be sure to use paper rolls that meet specifications
.
1. Open the printer cover by pulling the handle on the front of the printer toward you.
2. If the paper is being changed remove the empty paper core from the spindle.
3. Insert the new paper roll onto the spindle with the paper feeding over the top.
4. Push the paper roll down into the paper well.
5. Pull the paper edge over the platen and past the edge of the printer cover.
6. Close the cover making sure that the paper edge is protruding from the front of the
printer. Press the Feed button to check for proper operation.
Front of Printer
Platen Front Cover
Paper Feed Button
Spindle