Specifications

General Information Model 181 Series 180 Programmer’s Guide
TransAct Technologies
Page 3 -2 09/26/2000
INTERFACE SPECIFICATIONS
 SERIAL
The Serial interface is a standard RS232 interface on a 9 pin D-Shell connector. It
is defined as a standard DTE device. A null model cable is required to interface the
printer to another DTE device (a PC). See the serial port description contained in the
communications area later in this manual for more information.
 PARALLEL
The Parallel port is a standard 25 Pin D-Shell as defined in the P1284-A standard
or a 36 pin Centronix Connector as defined in the P1284-B standard. See the parallel port
description contained in the communications area later in this manual for more
information.
 CASH DRAWER
The Printer supports dual cash drawers (with a “Y” connector) with status. The
interface will provide status and 24 VDC up to 1.25 AMP to the cash drawer. See the
cash drawer interface description later in this manual.
 USB
The USB is a USB type B connector. See the USB connection contained in the
communication area later in this manual for more information.
ACCESSORIES
 Power supply – Phi-Hong PSA-53
 Power cord
 Paper roll
 #10 screws and anchors kit (for wall mounting)
OPTIONS
 USB Interface
 Kitchen Buzzer
 PDF 417 barcode printing