Specifications

5-10 Chapter 5: Technical Specifications
Physical and Operating Environment
Temperature and Humidity
Temperature in Degrees %Humidity
Operating: w/ Knife
5C to 28C ( 41F to 82F) 10 to 90
28C to 45C ( 82F to 113F) 10 to 35
Operating: w/o Knife
5C to 35C ( 41F to 95F) 5 to 90
35C to 50C ( 95F to 122F) 5 to 40
Storage:
-10C to 50C ( 14F to 122F) 5 to 90
Transit:
-40C to 60C (-40F to 140F) 5 to 95
Electrical
The 7158 printer complies with the regulatory EMI standards and
levels indicated in the section on Certifications when tested as a stand-
alone unit.
When connected to a host terminal or system, the 7158 also complies
with these standards and levels, provided that the host terminal or
system first complies without the 7158 printer connected.
Slip Media
The 7158 prints 1 to 5 part forms with the following limitations:
• The minimum thickness of a single part form is .08 mm (.003 inch).
• If present in a multi-part form, cardstock will be the bottom part.
• Maximum total thickness is .40 mm (.016 inch).
• Minimum form reflectivity is 60%