Specifications

Chapter 7: Programming Guide 7-111
The bits of n are defined in the table.
Bit Off/On Hex Decimal Status for ASB
0 Off
On
00
01
0
1
Cash drawer status disabled.
Cash drawer status enabled.
1 Off
On
00
02
0
2
RS-232C Busy status disabled.
RS-232C Busy status enabled.
2 Off
On
00
04
0
4
Error status disabled.
Error status enabled.
3 Off
On
00
08
0
8
Receipt paper roll status disabled.
Receipt paper roll status enabled.
4 - - - Undefined
5 Off
On
00
20
0
32
Slip detector, slip paper status disabled.
Slip detector, slip paper status enabled.
6 - - - Undefined
7 - - - Undefined
Default: 0 (ASB disabled)
(Select or Cancel Status Back—continued on the next page)
Exceptions
If n = 0, ASB is disabled.
Related Information
When Auto Status Back (ASB) is enabled using this command, the
status transmitted by other commands and the ASB status are
differentiated according to the information found in Recognizing Data
from the printer, (in the Real Time Commands section in this chapter).
The status bytes to be transmitted are described in the following four
tables.
Byte 1 = printer information
Byte 2 = error information
Byte 3 = paper sensor information
Byte 4 = paper sensor information