Instructions

2020-06-30 | Technical improvements, changes in design, printing- and other errors expected. 9
3.2. Power supply
The multiswitch is supplied at the Unicable II output via the combiner TZU 15-04 from the power supply unit
TZU 11-03.
3.3. Reception of one satellite
The satellite inputs of the multiswitch are set ex factory such that they support Universal Quattro LNBs The
following figure shows an application example of the reception of a satellite.
Connect the outputs of the Quattro LNB with the V/L, V/H, H/L and H/H connections of the SES. Make sure to
connect the correct outputs of the Quattro LNB with the correct inputs of the SES.
The multiswitch is equipped with a terrestrial input. Connect the terrestrial antenna to this input, if required.