Instructions

Operation Instructions | SES 5532-19 | Programmable Unicable II Multiswitch
4 2020-06-30 | Technical improvements, changes in design, printing- and other errors expected.
1. Product description
Before installation and commissioning of the product, please read the following instructions and information.
We recommend you to keep these operating instructions for future reference.
1.1. General
SES 5532-19: Programmable Unicable II multiswitch
The devices are only suitable for distributing radio and television signals inside the house! If a device is used
for other purposes, no warranty is given.
1.2. Scope of delivery
∂ 1 × programmable Unicable II multiswitch SES 5532-19
∂ 5 × CFA 11-00 terminating resistors
∂ 1 × power supply unit
∂ 1 × power inserter
∂ 1 × quick start
Optionally available:
∂ Programmer SZU 55-00
∂ Combiner SZU 55-02
1.3. Characteristics
∂ Single cable system with up to 32 user bands
∂ For 1, 2 or 4 SAT positions (2/4 SAT positions when wideband LNB SCO 2-00 is used)
∂ Interference-free, none of the apartments is affected when programmable SSD 6-xx antenna sockets are
used
∂ Use of the existing cable structure, no dust, no dirt
∂ Compatible with EN 50494 and EN 50607
∂ Configuration by means of the Unicable II programmer SZU 55-00