Manual
Table Of Contents
- Betriebsanleitung
- 1. Produktbeschreibung
- 2. Montage
- 3. Installation
- 4. Typische Anwendungen
- 5. Konfiguration des EOC 2-32
- 5.1. Zugriff zur Benutzeroberfläche
- 5.2. Information
- 5.3. Netzwerk-Einstellungen (Network)
- 5.4. WLAN-Grundeinstellungen (Radio)
- 5.5. 2,4-GHz-Band VAP (Virtueller Access Point)
- 5.6. 5-GHz-Band VAP (Virtueller Access Point)
- 5.7. Virtuelle LANs einrichten (VLAN)
- 5.8. Aktivieren der Änderungen (Active Changes)
- 5.9. Passwort ändern (User)
- 5.10. Firmware-Upgrade
- 5.11. Rücksetzen auf Werkseinstellungen
- 6. Technische Daten
- Operation instructions
- 1. Product description
- 2. Mounting
- 3. Installation
- 4. Typical applications
- 5. Configuration of EOC 2-32
- 6. Technical data
Operation instructions | EOC 1-32 and EOC 2-32 | Ethernet over Coax Peer to Peer
Page 22 of 26 AXING-BA_EOC-1-2-32.pdf | Technical improvements, changes in design, printing and other errors reserved. | 2022-08-16
5.10. Firmware Upgrade
Firmware version
The current version of the firmware can be found in the Information window (see 5.2 on page 13).
Download of the file
You can find firmware updates for download by entering the article in the search field on www.axing.com.
On the product page you will find the current firmware in the Downloads tab.
Download the file to your computer and unpack it.
Upgrade of the Firmware
Click on Upgrade in the navigation on the right.
Click Browse ... and select the upgrade file.
Click Start.
The firmware/the driver file is loaded into the EOC and the device is restarted.
The new firmware will be activated immediately after restarting the EOC.
5.11. Restoring the factory settings
Press the reset button R on the back of the device for a few seconds until the LEDs start flashing.
All configuration settings made are reset to the factory settings.