Manual
Table Of Contents
- Betriebsanleitung
- 1. Produktbeschreibung
- 2. Montage
- 3. Installation
- 4. Typische Anwendungen
- 5. Konfiguration des EOC 2-32
- 5.1. Zugriff zur Benutzeroberfläche
- 5.2. Information
- 5.3. Netzwerk-Einstellungen (Network)
- 5.4. WLAN-Grundeinstellungen (Radio)
- 5.5. 2,4-GHz-Band VAP (Virtueller Access Point)
- 5.6. 5-GHz-Band VAP (Virtueller Access Point)
- 5.7. Virtuelle LANs einrichten (VLAN)
- 5.8. Aktivieren der Änderungen (Active Changes)
- 5.9. Passwort ändern (User)
- 5.10. Firmware-Upgrade
- 5.11. Rücksetzen auf Werkseinstellungen
- 6. Technische Daten
- Operation instructions
- 1. Product description
- 2. Mounting
- 3. Installation
- 4. Typical applications
- 5. Configuration of EOC 2-32
- 6. Technical data
Operation instructions | EOC 1-32 and EOC 2-32 | Ethernet over Coax Peer to Peer
Page 20 of 26 AXING-BA_EOC-1-2-32.pdf | Technical improvements, changes in design, printing and other errors reserved. | 2022-08-16
5.7. Configuring Virtual LANs (VLAN)
In the VLAN window, the Tag VLAN field is set to Disable by default.
If you want to configure VLANs, select the Enable option.
Priority
Defines the priority (e.g. for traffic shaping). The value can be set between 0 and 7.
VID:
Each VLAN is assigned a unique number, the VID. A device that belongs to the VLAN with VID=1 can
communicate with any other device on the same VLAN, but not with a device on another VLAN. The VID can be
set between 1 and 4094.
In Rule
• Set one of the VID Matched or Accept All options.
Out Rule
Set one of the Untag, Tag or Bypass options.
Click Update to apply the entered values.
Important: This does not yet activate the changes in the EOC. Only when you activate them on the Active
Changes page will the changes actually be applied to the device (see 5.8 on page 21).