Manual
Table Of Contents
- Betriebsanleitung
- 1. Produktbeschreibung
- 2. Montage
- 3. Installation
- 4. Typische Anwendungen
- 5. Konfiguration des EOC 2-32
- 5.1. Zugriff zur Benutzeroberfläche
- 5.2. Information
- 5.3. Netzwerk-Einstellungen (Network)
- 5.4. WLAN-Grundeinstellungen (Radio)
- 5.5. 2,4-GHz-Band VAP (Virtueller Access Point)
- 5.6. 5-GHz-Band VAP (Virtueller Access Point)
- 5.7. Virtuelle LANs einrichten (VLAN)
- 5.8. Aktivieren der Änderungen (Active Changes)
- 5.9. Passwort ändern (User)
- 5.10. Firmware-Upgrade
- 5.11. Rücksetzen auf Werkseinstellungen
- 6. Technische Daten
- Operation instructions
- 1. Product description
- 2. Mounting
- 3. Installation
- 4. Typical applications
- 5. Configuration of EOC 2-32
- 6. Technical data
Operation instructions | EOC 1-32 and EOC 2-32 | Ethernet over Coax Peer to Peer
Page 6 of 26 AXING-BA_EOC-1-2-32.pdf | Technical improvements, changes in design, printing and other errors reserved. | 2022-08-16
The devices connected to LAN1 / 2 receive their IP addresses from the DHCP server (usually on the Internet
router). Devices connected via WiFi also receive their IP addresses from the DHCP server..
EOC 1-11 receive no IP addresses. The EOC 2-11 receive two IP addresses each from the DHCP server (one for
G.hn and one for WiFi).
Recommendation: Make a note of the MAC addresses of the EOC 2-11 and the associated IP addresses.
1.4. WiFi access to EOC 2-32
The EOC 2-3x offers two WiFi bands, 2.4 GHz and 5 GHz.
Depending on which technology your end device supports, you log on to the respective band.
The factory SSIDs of the 2.4 GHz and 5 GHz WiFi band and the password are printed on the bottom of the device.