User manual

77
10.1.2 Storage Formatting
1. Click on [Storage]-[Storage Device], you will see the following page.
2. Perform [Format] operation according to the instructions below
File System Type
Select the type of file system you want to use in the storage. You may choose
FAT or EXT3 that supported by the system
FAT file system support up to 2TB storage device and 4GB for single file.
EXT3 file system support up to 8TB storage device and the single file can be
bigger than 4GB.
Format
***Note: You will get lost all the data in the storage after formatting the device.
Press the button to start formatting your storage device.
Please note that do not detach your device during formatting.
During the formatting process, the router function is suspended and the USB
status LED will blink. Please be patient, especially for the large capacity
device, and wait for the completion of the process.
Please note that the Windows system cannot access the EXT3 file system directly. If user wants to get access to
EXT3 file system in the Windows O.S., the additional tools is needed.