User manual

8.3 TurboNAT SETUP

NAT is often the performance bottleneck in an IP sharing device. Generic routers are generally insufficient when

dealing with a high-speed broadband network. Therefore, TurboNAT is designed to solve this problem. By

accelerating the NAT performance, TurboNAT allows AXIMCom X-Router to fulfill the higher speed network and

to reserve the system performance for other features such as ACL and VPN servers.

In order to meet the Gigabit Ethernet requirement, AXIMCom‟s GbE X-Routers are supported with Hardware NAT

mode. The NAT throughput can be up to 950Mbps, hence supports the Gigabit Ethernet WAN usage.

1. Click on [Bandwidth] – [TurboNAT] tab. You will see the following screen.

2. Configure [TurboNAT] Settings following the instructions below

Please note that, when enable the Hardware NAT mode, some of the management features will be disabled

automatically, such as iDBM, Universal Repeater and WDS functions.

Hardware NAT

Select Enable/Disable to enable/disable Hardware NAT

TurboNAT

Select Enable/Disable to enable/disable TurboNAT.