User manual

66
8.1.3 Add DBM Rule
It is very simple to set-up a DBM rule, users only need to set the IPs to be controlled in the DBM IP ranges.
After assignment of the DBM IPs, the AXIMCom‟s Router will dynamically control the bandwidth by equality and
priority methods
1. Click on [Add] tab. You will see the following screen.
2. Configure [Add DBM] Settings following the instructions below
Sequence Number
This defines the sequence of the DBM rules.
Rule Name
Name of the DBM rule.
Rule Enable
Enable/Disable this DBM rule
Internal IP Range
Set up the internal IP range for this DBM rule.
3. DBMSetting Example
The maximum DBM IPs is 32 in the X-108NX. The user may set the DHCP releasing range from 192.168.2.30 to
192.168.1.45 and set those IP as DBM IP accordingly. In this manner, all user access through this router will be
controlled by DBM system without any other complicated settings.