User manual

53
4. Example: Bind IP to a MAC
If users need to bind a IP to a specified MAC (network device), one can follow the settings as below.
Sequence
Number
User1
Rule Name
Enable
MAC
00:33:44:55:66:77
Action
Allow Access
ACL Enable
Enable
Static ARP Enable
Enable
Static DHCP
Enable
Enable
IP
192.168.1.100
Sequence Number
This defines the sequence (priority) of all the MAC ACL actions.
Rule Name
Name of the MAC access rule.
MAC
Set up the MAC Address to which you would like to enable the MAC ACL
action.
Action
Choose ALLOW/DENY to ALLOW/DENY
ACL Enable
Enable/Disable this MAC access rule
Static ARP Enable
Enable/Disable this Static ARP rule
Static DHCP Enable
Enable/Disable this Static DHCP rule
IP
The IP address corresponds to static ARP or static DHCP.