User manual

49
7.2 ACCESS CONTROL LIST (ACL) SETUP
7.2.1 ACL Settings
1. Click on [Security] – [Access Control] tab. You will see the following screen.
Please do not change the parameters unless you wish to customize it by yourself.
2. Configure Access Control List (ACL) Settings following the instructions below.
ACL
Select Enable to enable ACL.
Select Disable to disable ACL.
Default ACL
Action
Check Enable to enable a specific MAC Filter rule.
Uncheck Enable to disable a specific MAC Filter rule.
Type the MAC address to permit a device to access to the network.
* Enabling MAC filtering blocks all MAC addresses which are not listed in the MAC
Filter Rule. Be aware that adding the MAC address of your managing computer is
required in order to access to AXIMCom X-Router.