User manual

35
5.7 MAC ADDRESS CLONE SETUP
Some ISPs only allow a registered MAC address to access to the internet. To bypass the rule, you need to set up
a cloned MAC address for AXIMCom X-Router using the pre-registered MAC address.
1. Click on [Setup] – [MAC Address Clone] tab. You will see the following screen.
2. Configure your Internet Connection (WAN) MAC Clone following the instructions below.
Clone WAN MAC
If your ISP only grants access to a fixed MAC address, please select Enable.
If your ISP does not enforce access control, please select Disable.
MAC Address
If the PC you use to configure AXIMCom X-Router is the device which has the
right MAC address to access the internet, press Get Current PC MAC Address
button. Or you can type in the MAC Address which has been granted access
by your ISP.