Spec Sheet

Church Road, Weston on the Green, Oxfordshire, OX25 3QP, UK
Tel: [phone] Fax: [phone]
[e-mail] www.axicon.com
Axicon
7
025-S-I
P
*
Barcode Verifiers
Product IP* Summary
As an extension to the range of very popular
7000 series verifiers Axicon now offer these
with a choice of IP (Industrial Protection*)
ratings.
The Axicon 7025-S-IP50 has an IP50 rating
(protection against harmful dust particles).
The Axicon 7025-S-IP65 has an IP65 rating
(totally sealed against all dust ingress and
sealed against low pressure water spray
from all directions).
The IP50 rating makes the 7025-S-IP50 ideal
for use in dusty environments while the IP65
rated version is ideal for use where a higher
level of protection is required – including
use in hose-down areas such as in the food
industry.
Product Verification Summary
Independently tested & certified to meet
International Standards, the Axicon 7025-S-
IP verifiers have been specifically designed
for all barcodes where an 8, 10 or 20mil
aperture is mandatory (such as GS1-128 and
ITF-14), up to 185mm (7.28”) width
including quiet zones.
The simple to use design reduces user error
risk and eliminates product damage whilst
providing the highest level of accuracy
achievable for verification.
The system consists of a state of the art
CCD read head and application software.
Our development program means that not
only will your verifier will always meet the
latest ISO/ANSI standards, but in addition
also a wide range of application standards
including GS1-128 & ITF-14.
Typical Application
Traded units including pallet/ SSCC
barcodes whether printed on labels, cartons
or shrink film including those printed by Ink-
jet directly on to outer cases.
Axicon 7025-S-IP
Barcode Verifier
Benefits
 ISO/ANSI Verification Standards
 Choice of either IP50 or IP65
Industrial Protection ratings
 Automatic variable aperture
 Up to 100 Scans per Second
 Ideal for GS1 Databar Stacked
Codes
 Ideal for barcodes with small
height
 Multi Language User Interface
 Wide range of “plug-ins” for
additional features.
 USB2 Connectivity
 Automatic Calibration
Reminder
Enhanced Accuracy and Improved Productivity
The “S”
range of Axicon verifiers has a
“Continuous Scan” feature.
Just place the verifier at the top or bottom of the
barcode, press the trigger and slide the verifier
over the code – in less than a second you can have
results averaged up to 100 scans of the code at
different points in the bar height.