Datasheet

108-98009 Rev. F
All specications subject to change. Consult Tyco Electronics for latest specications. 8 of 12
Telecom-, Signal and RF Relays
P1 V23026 Relay
AXICOM
Insulation
Insulation resistance at 500 Vdc
> 10
9

Dielectric test voltage (1 min)
between coil and contacts (Relay with 1 coil)
between open contacts
1500 Vrms
500 Vrms
Surge voltage resistance
according to Bellcore TR-NWT-001089 (2 / 10 µs)
between coil and contacts (Relay with 1 coil)
between open contacts
according to FCC 68 (10 / 160 µs)
between coil and contacts (Relay with 1 coil)
between open contacts
2500 V
on request 2000 V
1500 V
on request 1500 V
Insulation according to IEC / EN 60950
Clearance
Creepage distance
Basic insulation
0.75 mm
0.75 mm
High Frequency Data
Capacitance
between coil and contacts
between open contacts
max. 6 pF
max. 5 pF
RF Characteristics
Isolation at 100 / 900 MHz
Insertion loss at 100 / 900 MHz
V.S.W.R. at 100 / 900 MHz
- 30.0 dB / - 18.0 dB
- 0.12 dB / - 1.9 dB
1.06 / 1.75
General Data
Operate time at U
nom
typ. / max.
1 ms / 2 ms
Reset time (latching) at U
nom
, typ. / max.
1 ms / 2 ms
Release time without diode in parallel (non-latching), typ. / max. 0.4 ms / 1 ms
Release time with diode in parallel (non-latching), typ. / max. 1.2 ms / 2 ms
Bounce time at closing contact, typ. / max. 1 ms / 3 ms
Maximum switching rate without load 200 operations/s
Ambient temperature -40 °C ... +70 °C, +85 °C on request
Thermal resistance < 130 K/W
Maximum permissible coil temperature 85 °C
Vibration resistance (function) 20 G, 200 to 2000 Hz
40 G, 10 to 200 Hz
Shock resistance, half sinus, 11 ms 50 G (function)
Degree of protection / Environmental protection immersion cleanable, IP 67 / RT III
Needle flame test application time 20 s, no burning < 15s
Mounting position any
Processing information Ultrasonic cleaning possible
Weight (mass) max. 2 g
Terminal surface SnCu 0.7
Moisture sensitive level (JEDEC J-STD-020B) - SMD types MSL 3
Resistance to soldering heat 265 °C / 10 s
All data refers to 23 °C unless otherwise specified.