Datasheet
06-2015, Rev. 0615
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
2
AXICOM
RF Signal Relays
HF3 Relay
(Continued)
RF Data
Isolation
at 100MHz/900MHz 80dB/72dB 80dB/72dB
at 3GHz 45dB 40dB
Insertion loss
at 100MHz/900MHz 0.03dB/0.12dB 0.03dB/0.12dB
at 3GHz 0.35dB 0.40dB
Voltage standing wave ratio (VSWR)
at 100MHz/900MHz/3GHz 1.05/1.20/1.20 1.05/1.20/1.40
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature -55°C to +85°C
Thermal resistance <165K/W
Category of environmental protection
IEC 61810 RT III - wash tight
Degree of protection, IEC 60529 IP 67, immersion cleanable
Vibration resistance (functional) 35g, 10 to 1000Hz
Shock resistance (functional), half sinus 11ms 50g
Shock resistance (destructive), half sinus 0.5ms 150g
Terminal type SMT
Weight max. 2.5g
Resistance to soldering heat SMT Peak Value
IEC 60068-2-58 265°C
Moisture sensitive level, JEDEC J-Std-020D MSL3
Ultrasonic cleaning not recommended
Packaging/unit reel/400 pcs., box/400 or 2000 pcs.
Insulation Data 50Ω version 75Ω version
Initial dielectric strength
between open contacts 600V
rms
between contact and coil 1000V
rms
Initial surge withstand voltage
between open contacts 1000V
between contact and coil 1500V
108-98000 Rev. F
All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 12
Telecom-, Signal and RF Relays
HF3 Relay
AXICOM
Umax. at 0 A
Uop. min.
Urel. min.
140 mW
Coil Voltage [U/Unom]
Ambient Temperature [°C]
Terminal assignment
Relay top view
Non-latching type,
not energized condition
Latching type, 2 coils
reset condition
Latching type, 1 coil
rest condition
Coil Operating Range
0
0.5
1
1.5
2
2.5
3
3.5
-55-45 -35-25 -15-5515 25 35 45 55 65 75 85 95 105115 125135
Unom. nominal coil voltage
Umax. at 0 A
Uop. min.
70 mW
Coil Voltage [U/U
nom]
Ambient Temperature [°C]
Unom. nominal coil voltage
Unom = Nominal coil voltage
Umax. = Upper limit of the operative range of
the coil voltage (limiting voltage)
U
op. min.
= Lower limit of the operative range of
the coil voltage (reliable operate voltage)
For latching relays Uset min. resp. Ureset min.
U
rel. min.
= Lower limit of the operative range of
the coil voltage (reliable release voltage)
140 mW 70 mW
Contacts in reset position. Contact po-
sition might change during transporta-
tion and must be reset before use.
108-98000 Rev. F
All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 12
Telecom-, Signal and RF Relays
HF3 Relay
AXICOM
Umax. at 0 A
Uop. min.
Urel. min.
140 mW
Coil Voltage [U/U
nom
]
Ambient Temperature [°C]
Terminal assignment
Relay top view
Non-latching type,
not energized condition
Latching type, 2 coils
reset condition
Latching type, 1 coil
rest condition
Coil Operating Range
0
0.5
1
1.5
2
2.5
3
3.5
-55-45 -35-25 -15-5515 25 35 45 55 65 75 85 95 105115 125135
Unom. nominal coil voltage
Umax. at 0 A
Uop. min.
70 mW
Coil Voltage [U/U
nom]
Ambient Temperature [°C]
U
nom.
nominal coil voltage
Unom = Nominal coil voltage
Umax. = Upper limit of the operative range of
the coil voltage (limiting voltage)
U
op. min.
= Lower limit of the operative range of
the coil voltage (reliable operate voltage)
For latching relays Uset min. resp. Ureset min.
U
rel. min.
= Lower limit of the operative range of
the coil voltage (reliable release voltage)
140 mW 70 mW
Contacts in reset position. Contact po-
sition might change during transporta-
tion and must be reset before use.
Coil operating Range