Datasheet

ManualsBrandsAxicom ManualsRelaysSignal Relay IM A/B, 1NO, DC, 5V, 2A, 178Ohm

01-2016, Rev. 0116

www.te.com

a TE Connectivity Ltd. company

Datasheets and product speciﬁcation

according to IEC 61810-1 and to be used

only together with the ‘Deﬁnitions’ section.

Datasheets and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Datasheets, product data, ‘Deﬁnitions’ sec-

tion, application notes and all speciﬁcations

are subject to change.

AXICOM

Signal Relays

IM - B Relay (Continued)

dielectric version

Initial dielectric strength

between open contacts 2500Vrms

between contact and coil 3500Vrms

Initial surge withstand voltage

between open contacts 3500V

between contact and coil 4900V

Initial insulation resistance

between insulated elements >10

Capacitance

between open contacts max. 1pF

between contact and coil max. 2pF

between adjacent contacts max. 2pF

RF Data

Isolation at 100MHz/900MHz 37.0dB/18.8dB

Insertion loss at 100MHz/900MHz 0.03dB/0.33dB

Voltage standing wave ratio (VSWR)

at 100MHz/900MHz 1.06/1.49

Other Data

Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content

refer to the Product Compliance Support Center at

www.te.com/customersupport/rohssupportcenter

Ambient temperature -40°C to +85°C

Thermal resistance < 150K/W

Category of environmental protection

IEC 61810 RT V - hermetically sealed

Degree of protection

IEC 60529 IP 67, immersion cleanable

Vibration resistance (functional) 20g, 10 to 500Hz

Shock resistance (functional), half sinus 11ms 50g

Shock resistance (destructive), half sinus 0.5ms 500g

Weight max. 0.75g

Resistance to soldering heat THT

IEC 60068-2-20 265°C/10s

Resistance to soldering heat SMT

IEC 60068-2-58 265°C/10s

Moisture sensitive level, JEDEC J-Std-020D MSL3

Ultrasonic cleaning not recommended

Packaging/unit

THT version tube/50pcs., box/1000 pcs.

SMT version

reel/1000 pcs., box/1000 or 5000 pcs.

THT version

Dimensions

SMT version

Standard version

Gull wings

PCB layout

TOP view on component side of PCB

THT mounting holes SMT - solder pads

108-98001 Rev. M

All speciﬁcations subject to change. Consult Tyco Electronics for latest speciﬁcations.

10 of 28

AXICOMÊSignalÊRelays

IM-A Relay 1 Pole Break / 1 Form B / SPST NC

IMÊTHT

Standard

IMÊSMT

GullÊWings

mm inch mm inch

10.00Ê±Ê0.08

6.00Ê±Ê0.08

5.65ÊÐÊ0.20

0.393Ê±Ê0.003

0.236Ê±Ê0.003

0.222ÊÐÊ0.008

10.00Ê±Ê0.08

ÊÊ6.00Ê±Ê0.08

ÊÊ5.65ÊÐÊ0.20

0.393Ê±Ê0.003

0.236Ê±Ê0.003

0.222ÊÐÊ0.008

THT Version

Standard Version

SMT Version

Mounting Hole Layout

View onto the component side of the PCB (top view)

Solder Pad Layout

View onto the component side of the PCB (top view)

Dimensions IM-A Dimensions in mm

Terminal Assignment

Relay – top view

Non-Latching Type

not energized condition

Latching Type, 1 Coil

reset condition

Coplanarity ≤ 0.1mm

3.2

N/A

5.08Ê±Ê0.10

3.20Ê±Ê0.15

2.20Ê±Ê0.15

0.40

0.75

0.125

N/A

0.200Ê±Ê0.004

0.126Ê±Ê0.006

0.087Ê±Ê0.006

0.015

0.029

N/A

7.50Ê±Ê0.30

5.08Ê±Ê0.10

3.20Ê±Ê0.15

2.20Ê±Ê0.15

0.4

N/A

0.295Ê±Ê0.011

0.200Ê±Ê0.004

0.126Ê±Ê0.006

0.087Ê±Ê0.006

0.015

N/A

10.0±0.08

6.0±0.08

5.08±0.1

5.4±0.15

0.4

5.65-0.2

3.2

0.75

10.0±0.08

6.0±0.08

7.5±0.3

5.4±0.15

0.4

5.65-0.2

5.08±0.1

Coplanarity ≤0.1mm

108-98001 Rev. M

All speciﬁcations subject to change. Consult Tyco Electronics for latest speciﬁcations.

10 of 28

AXICOMÊSignalÊRelays

IM-A Relay 1 Pole Break / 1 Form B / SPST NC

IMÊTHT

Standard

IMÊSMT

GullÊWings

mm inch mm inch

10.00Ê±Ê0.08

6.00Ê±Ê0.08

5.65ÊÐÊ0.20

0.393Ê±Ê0.003

0.236Ê±Ê0.003

0.222ÊÐÊ0.008

10.00Ê±Ê0.08

ÊÊ6.00Ê±Ê0.08

ÊÊ5.65ÊÐÊ0.20

0.393Ê±Ê0.003

0.236Ê±Ê0.003

0.222ÊÐÊ0.008

THT Version

Standard Version

SMT Version

Mounting Hole Layout

View onto the component side of the PCB (top view)

Solder Pad Layout

View onto the component side of the PCB (top view)

Dimensions IM-A Dimensions in mm

Terminal Assignment

Relay – top view

Non-Latching Type

not energized condition

Latching Type, 1 Coil

reset condition

Coplanarity ≤ 0.1mm

3.2

N/A

5.08Ê±Ê0.10

3.20Ê±Ê0.15

2.20Ê±Ê0.15

0.40

0.75

0.125

N/A

0.200Ê±Ê0.004

0.126Ê±Ê0.006

0.087Ê±Ê0.006

0.015

0.029

N/A

7.50Ê±Ê0.30

5.08Ê±Ê0.10

3.20Ê±Ê0.15

2.20Ê±Ê0.15

0.4

N/A

0.295Ê±Ê0.011

0.200Ê±Ê0.004

0.126Ê±Ê0.006

0.087Ê±Ê0.006

0.015

N/A

10.0±0.08

6.0±0.08

5.08±0.1

5.4±0.15

0.4

5.65-0.2

3.2

0.75

10.0±0.08

6.0±0.08

7.5±0.3

5.4±0.15

0.4

5.65-0.2

5.08±0.1

Coplanarity ≤0.1mm

Contacts are shown in reset

condition. Contact position might

change during transportation and

must be reset before use.

Terminal assignment

TOP view on relay

IM-B, 1 form A (NO)

108-98001 Rev. M

All speciﬁcations subject to change. Consult Tyco Electronics for latest speciﬁcations. 12 of 28

AXICOMÊSignalÊRelays

IM-B Relay 1 Pole Make / 1 Form A / SPST NO

IMÊTHT

Standard

IMÊSMT

GullÊWings

mm inch mm inch

10.00Ê±Ê0.08

6.00Ê±Ê0.08

5.65ÊÐÊ0.20

0.393Ê±Ê0.003

0.236Ê±Ê0.003

0.222ÊÐÊ0.008

10.00Ê±Ê0.08

ÊÊ6.00Ê±Ê0.08

ÊÊ5.65ÊÐÊ0.20

0.393Ê±Ê0.003

0.236Ê±Ê0.003

0.222ÊÐÊ0.008

THT Version

Standard Version

SMT Version

Gull Wings

Mounting Hole Layout

View onto the component side of the PCB (top view)

Solder Pad Layout

View onto the component side of the PCB (top view)

Dimensions IM-B

Dimensions in mm

Terminal Assignment

Relay – top view

Non-Latching Type

not energized condition

Latching Type, 1 Coil

reset condition

Coplanarity ≤ 0.1mm

3.2

N/A

5.08Ê±Ê0.10

3.20Ê±Ê0.15

2.20Ê±Ê0.15

0.40

0.75

0.125

N/A

0.200Ê±Ê0.004

0.126Ê±Ê0.006

0.087Ê±Ê0.006

0.015

0.029

N/A

7.50Ê±Ê0.30

5.08Ê±Ê0.10

3.20Ê±Ê0.15

2.20Ê±Ê0.15

0.4

N/A

0.295Ê±Ê0.011

0.200Ê±Ê0.004

0.126Ê±Ê0.006

0.087Ê±Ê0.006

0.015

N/A

108-98001 Rev. M

All speciﬁcations subject to change. Consult Tyco Electronics for latest speciﬁcations. 12 of 28

AXICOMÊSignalÊRelays

IM-B Relay 1 Pole Make / 1 Form A / SPST NO

IMÊTHT

Standard

IMÊSMT

GullÊWings

mm inch mm inch

10.00Ê±Ê0.08

6.00Ê±Ê0.08

5.65ÊÐÊ0.20

0.393Ê±Ê0.003

0.236Ê±Ê0.003

0.222ÊÐÊ0.008

10.00Ê±Ê0.08

ÊÊ6.00Ê±Ê0.08

ÊÊ5.65ÊÐÊ0.20

0.393Ê±Ê0.003

0.236Ê±Ê0.003

0.222ÊÐÊ0.008

THT Version

Standard Version

SMT Version

Gull Wings

Mounting Hole Layout

View onto the component side of the PCB (top view)

Solder Pad Layout

View onto the component side of the PCB (top view)

Dimensions IM-B

Dimensions in mm

Terminal Assignment

Relay – top view

Non-Latching Type

not energized condition

Latching Type, 1 Coil

reset condition

Coplanarity ≤ 0.1mm

3.2

N/A

5.08Ê±Ê0.10

3.20Ê±Ê0.15

2.20Ê±Ê0.15

0.40

0.75

0.125

N/A

0.200Ê±Ê0.004

0.126Ê±Ê0.006

0.087Ê±Ê0.006

0.015

0.029

N/A

7.50Ê±Ê0.30

5.08Ê±Ê0.10

3.20Ê±Ê0.15

2.20Ê±Ê0.15

0.4

N/A

0.295Ê±Ê0.011

0.200Ê±Ê0.004

0.126Ê±Ê0.006

0.087Ê±Ê0.006

0.015

N/A

*this relay contains SF6 (Sulfur hexaﬂuoride, CAS number: 2551-62-4) for dielectric strength

enhancement, SF6 is hermetically sealed in relay without leaks to air during normal applica-

tion as recommended per the applicable product speciﬁcation. It is clariﬁed that the usage

of SF6 in mini signal relay is not prohibited by related regulations. Please contact TE local

sales or ﬁeld engineer for further information and detailed material declaration.