Tus neeg siv phau ntawv

21
EN
DO NOT USE A METAL SCREWDRIVER, KNIFE, ETC. FOR ADJUSTMENT
OPERATIONS NOT TO DAMAGE THE CIRCUIT BOARD.
The fan with the timer and the TR motion sensor – the fan starts when a person moves at a distance of 1 to 4 meters with
a horizontal viewing angle of the sensor of 100°.
After the movement stops, the fan continues to operate within the set time period adjustable from 2 to 30 minutes by the
timer.
WARNING! The fans rated for 12 V power voltage (stated on the packing box and on the fan casing) connect to
12 V power mains only!
Wiring diagram for a fan with a built-in switch and a fan with a motion sensor.
220-240 V (12 V)
Wiring diagram for a fan without a built-in switch.
S
220-240 V (12 V)
Wiring diagram for a fan equipped with a timer/timer and a humidity sensor, with a built-in switch.
L (~)
LT (ST)
N (~)
220-240 V (12 V)