Yeti Jr. Can-Am Maverick X3 RTR Manual

16
Getting-Started Checklist
The following checklist is a guide for getting your vehicle running for the first time.
Read all warning and safety information
in this manual.
Familiarize yourself with the vehicle
and its components.
Before vehicle operation, check that all nuts and
screws on moving parts are securely tightened.
Charge the battery pack. (Page 14)
Install 4x AA batteries into the
Transmitter. (PAGE 18)
Install the battery pack into the
vehicle. (Page 14)
Check to make sure steering and throttle
operation work correctly. (Page 17)
Range check the radio system. (Page 17)
Drive the vehicle, challenge yourself
and have fun.
Perform any maintenance as needed.
Note 1pc shim is being used.
When the distance< 29.1mm
1pc shim is being used
8*10*0.3mm
Turn on the Transmitter first, then
plug in the battery (power ESC)
(Page 14)
ON
29.1mm