1/10 SCX10 II Deadbolt 4WD Crawler RTR Manual

8
EN
Power
INSTALL THE VEHICLE BATTERY
5. Secure the battery to the tray with the hook and loop strap.
6. Connect the battery to the ESC.
7. Re-install the body and four body clips to the chassis.
NOTICE: Always disconnect the battery from the ESC before
powering off the transmitter. Loss of vehicle control may result.
1. Power on the transmitter.
2. Remove the four body clips from the body.
3. Lift the body from the chassis.
4. Place the battery in the battery tray. The battery tray length may be
adjusted to fit the battery as described in the previous section.