User Manual

EN
4
BOX CONTENTS
GETTING STARTED CHECKLIST
Read the manual
Familiarize yourself with the vehicle and its components
Check all screws, especially the driveshaft setscrews, for tightness
from the factory
Charge the vehicle battery
Install 4 AA batteries in the transmitter
Power on the transmitter
Install the vehicle battery in the vehicle
Check for proper function of the throttle and steering
Range check the radio system
Drive the vehicle, challenge yourself and have FUN!
Perform any necessary vehicle maintenance
• Parts Bag • Cross Wrench
• Battery charger compatible with
the chosen vehicle battery type
• (4) AA Alkaline batteries • 2s LiPo Battery
• Hex Drivers (1.5, 2.0, 2.5mm)
• Hobby Knife
• Side Cutter
• Curved Scissors
• Long-nose Plier
• Spektrum
™
STX2
®
2.4GHz Transmitter (SPMSTX200)
• AXI03019 - SMT10 Grave Digger 1/10th 4wd Monster Truck RTR
- 12T 550 Electric Motor (DYNS1222)
- SRX200 2CH Receiver (SPMSRX200)
- 15KG Servo, Waterproof, Metal Cent. Case, 23T (SPMS614)
- WP 60A Fwd/Rev Brushed ESC (DYNS2210)
REQUIRED EQUIPMENT
RECOMMENDED TOOLS
• 5-9 Cell NiMH/NiCd battery
(IC3™ Connector Required)
OR