User Manual

EN
4
BOX CONTENTS
GETTING STARTED CHECKLIST
Read the manual
Familiarize yourself with the vehicle and its components
Check all screws, especially the driveshaft setscrews, for tightness
from the factory
Charge the vehicle battery
Install 4 AA batteries in the transmitter
Power on the transmitter
Install the vehicle battery in the vehicle
Check for proper function of the throttle and steering
Range check the radio system
Drive the vehicle, challenge yourself and have FUN!
Perform any necessary vehicle maintenance
• Parts Bag • Cross Wrench
• Battery charger compatible with
the chosen vehicle battery type
• (4) AA Alkaline batteries • 3s LiPo Battery
• Hex Drivers (1.5, 2.0, 2.5mm)
• Hobby Knife
• Side Cutter
• Curved Scissors
• Long-nose Plier
• Spektrum™ DX3™ 2.4GHz Transmitter (SPMS2340T)
• AXI03016 - RR10™ Bomber 1/10th 4WD RTR
- SR315 3CH Receiver (SPMSR315)
- S614 15KG Servo (SPMS614)
- 35T Brushed Motor (AX31312)
- AE-5L ESC w/LED (DYNS2213)
REQUIRED EQUIPMENT
RECOMMENDED TOOLS
• 5-9 Cell NiMH/NiCd battery
(IC3™ Connector Required)
OR