SCX10 II UMG10 6x6 Rock Crawler - Manual

INSTALL THE VEHICLE BATTERY

NOTICE: Power to the vehicle is controlled by connecting and

disconnecting the battery from the ESC. Always power on the transmitter

ﬁrst before connecting the vehicle battery. Always disconnect the

battery from the ESC when not in use.

2. Remove the body clips

and open the hood.

3. Connect the battery to the ESC. Close

the hood and replace the body clips.

NOTICE: Always disconnect the battery from the

ESC before powering off the transmitter. Loss of

vehicle control may result.

1. Power on the transmitter.