Specifications

what’s new / telos /
1 for Hx1
2 for Hx2
XLR Female, Pin 2 High (Active Balanced with RF Protection)
Select between MIC and LINE levels
Adjustable from -10 to +4 dBu (nominal)
Bridging > 50K Ohms
+21 dBu
24 bits
Send Analog Inputs
Connector
Input Range
Input Level
Impedance
Analog Clip Point
Analog-to-Digital Converter Res
Analog Inputs
1 for Hx1
2 for Hx2
XLR Male, Pin 3 High
Nominal at +4 dBu
< 50 Ohms
24 bits
20 dB headroom from 4 dBu nominal levels
Receive Analog Outputs
Connector
Output Level
Impedance
Digital-to-Analog Converter Res
Headroom Before Clipping
Analog Outputs
Plug-in module converts the XLR inputs and outputs to AES3 (one input or output on Left channel
of AES stream)
Sample Rate Converters on all inputs and outputs. Inputs can accept 32, 44.1, and 48 kHz rates. Clock for
outputs may be sourced from the AES inputs or internally-generated 48 KHz
Nominal at -20 dBFs
Nominal at -20 dBFs
Overview
Rate Conversion
Input Level
Output Level
AES Digital Input/Output (Hx2 Option)
200 to 3400 Hz, +/- 1 dB
< 0.5% THD+N using 1 kHz sinewave
> 90 dB
Frequency Response
THD+N/Input
Signal to Noise
Audio Performance
Single 9 pin D-Sub connector with 2 status outputs (Ringing and ON-AIR) and 2 control
inputs (ON and OFF) per hybrid
General purpose Input/Output
Control Ports
Analog Telephone Line Connectivity
Universal POTS interface for worldwide application
Programmable loop current
Auto-Answer with selectable ring count
Worldwide disconnect signal detection (loop drop, dial tone, or re-order tone)
18
Radio Never Sleeps. Neither do we. We're here for you, anytime, with free round-the-clock, 24/7 technical support.
[phone] | [e-mail] | Telos-Systems.com
TELOS
TELOS