User's Manual

ICONS
Indicates signal strength and presence
of Wireless network.
In Use. Call is in progress.
Out of Service Area.
C
Cordless Mode.
D
Digital Wireless Mode.
A
Analog Wireless Mode.
R
Roaming. Out of the home service
area (on another carrier’s network).
Vibration Mode is ON.
Voice or Text Message has been
received.
Battery Level Indicator.
SETTING UP THE HARDWARE
 Connect the phone cord (also known as an RJ11) to the appropriate phone jack and
also to the Cordless Base. Both the phone cord and Cordless Base are included in your
package.
 Connect the Power Adaptor to the Cordless Base and connect the adaptor to an
appropriate power receptacle.
 If the Power LED lights up, the unit is ready. The Power LED should show.
CHARGING THE BATTERY
The Cordless Base also serves as the charging station for the phone. Place the handset in
the base station to charge the battery. The Charge LED on the base and animated battery icon
in the handset display indicates the status of charging.
The Charge LED will show Red when the handset is not fully charged and Green when it is
fully charged.
OVER THE AIR ACTIVATION (OTA)
What is OTA? OTA is the latest technology used to activate a customer’s phone on the
Verizon network. It gives you the ability to activate your phone from the comfort of your
home. The phone needs to be activated in your home market before using, so you need to
follow these steps. It is important that when you follow the activation instructions, you are
physically located in your home market. If you are in a different city and try to activate your
handset using the OTA function, you may download incorrect information to your handset
that will then cause it to malfunction.
ACTIVATING THE VERIZON ONE PHONE
Before the Verizon One Phone can be activated, you need to ensure that all the appropriate
applications and packages have been filled out and accepted. Once this has been done, you
can do the following:
1. Ensure that the handset is in Wireless Mode (you can step outside the range of the
base or unplug the base). The handset should not show a “C” on the display. If
the handset does show a “C” it means that it is in cordless mode. Ensure that you
are out of range of the cordless base station before going to the next step.
2. Dial the number *22890. This will initiate the OTA process and program the