User's Manual
- 8 -
© QuestLabs Limited
7. USER MANUAL.
8. CABLE FOR GPRS CONECCTION (OPTIONAL)
9. INSTALL CD(OPTIONAL)
1.3. SIM card installation
1. Disconnect the power supply.
2. Open battery cover on the bottom side of the TG130.
3. Disconnect the DC power cable to TG130
4. Take out the battery pack in the right position between the hold bars
5. Insert the SIM card into the socket as shown in the picture.
* Note: Make sure the SIM card is aligned properly with the directional arrow on the holder.
6. Connect the DC power cable to TG130.
7. Insert the battery pack in the right position between the hold bars.
8. Close the battery cover.
9. Connect the power supply to TG130.