User's Manual

- 30 -
© QuestLabs Limited
APPENDIX A:
HOW TO SET UP DATA CONNECTION FOR CIRCUIT SWITCHED DIGITAL FAX/DATA AND GPRS DATA
1. INTRODUCTION
FOR THE DATA CONNECTION, BELOW REQUIREMENTS ARE NEEDED.
- SIM CARD FROM YOUR NETWORK SERVICE PROVIDER FEATURING CSD OR GPRS .
- PC OR LAPTOP WITH USB PORT
- WINDOWS 2K OR LATER VERSION
- USB DATA CABLE INCLUDED IN BOX
NOTE THIS MANUAL IS FOR WINDOWS XP. SETTING IN OTHER WINDOWS VERSIONS IS SIMILAR.
2. INSTALL THE DRIVER FILES
1. EXTRACT THE DRIVER FILE “CP210X_VCP_WIN2K_XP_S2K3.ZIP”
NOTE 1 PLEASE ASK THE DRIVER FILE AT THE PLACE WHERE YOU BOUGHT PHONE OR TERMINAL
NOTE 2 DOWNLOAD ALSO AVAILABLE ON THE VCP(VIRTUAL COM PORT) DRIVER MANUFACTURER’S
HOMEPAGE:HTTP://WWW.SILABS.COM/TGWWEBAPP/PUBLIC/WEB_CONTENT/PRODUCTS/MICROCON
TROLLERS/USB/EN/MCU_VCP.HTM
VERSION 4.40 SHOULD ONLY BE USED, IF NOT AVAILABLE. EMAIL TO: [e-mail]
2. THEN, MANY FILES ARE EXTRACTED IN THE DIRECTORY WHERE YOU UNZIPPED.
3. EXECUTE THE FILE “CP210XVCPINSTALLER.EXE” FOR INSTALLING DRIVER.