User's Manual

- 15 -

* Note : When there is an incoming call when you are already holding the receiver, press ‘Flash key’ to answer

the call.

4. Basic Settings

4.1. Receiver Volume

You can control the volume level in the range of 1 to 7 using the keypad on the telephone.

Set Receiver Volume

# * 100 * <level> #

level : 1 - 7

Default volume is “5”.

4.2. Dial Delay Time

You can set dial delay time that your TG130 waits after the phone number is dialed before automatically

sending the number.

Set Dial Delay Time

# * 101 * <delay> #

delay : 3-20 seconds

Default delay time is 3 seconds.

4.3. Speed Dial Entry

You can store up to 10 frequently used phone numbers in the ‘SIM card’ memory and you can make a call by

pressing record number.

Add/Modify # * 102 * <N> * <NNNN> #

N : Record number(0-9)

NNNN : Phone number

Delete # * 103 * <N> # N : Record number (0-9)

Call using speed dial # * <N> # N : Record number (0-9)

4.4. Time and Date

You can set time and date to be displayed on a connected caller ID device.

Set Time # * 104 * <HH><MM> #

HH : Hours(24h)

MM : Minutes

Set Date # * 105 * <MM><DD><YYYY> #

MM : Month

DD : Day

YYYY : Year

For 2:30 PM, press # * 104 * 1430 #

For 31 DEC 2007, press # * 105 * 12312007 #

* Note : This function is dependent on the phone connected to TG130..

4.5. CID Format

You can set CID format that is available on wire phone with CID function.