User's Manual

Fixed Wireless Phone
18 User Manual
Figure 26 Set Keypad Password-1
 After a new password is entered, a password confirmation dialog will be
displayed. Re-enter the new password you just entered:
Figure 27 Set Keypad Password-2
 If the re-entered password is the same as the one you enter for the first time,
the new password will be changed successfully.
7 Technical Specifications
Frequency： CDMA 800MHZ
Maximum Transmitting Power： > 23 dBm @ 50 ohm
Receiving Sensibility： < -105dBm/1.23MHz;
External DC Voltage： DC 6.6 V
Operation Temperature： -10℃ ~ +45℃
Ambient Humidity： 0～95％
Storage Temperature： -30
o
C～＋60
o
C
Pressure： 86－106Kpa
8 Quick Troubleshooting Guide
 Moisture or ventilation problems: Visually inspect the Phone body, moisture
can damage the Phone. Ventilation is also very important. Move the Phone
to improve the ventilation as necessary.
 No power: Verify that AC power source and its corresponding circuit
breaker are functioning properly.
 Unable to receive incoming calls:
1. Make sure that the incoming call is not restricted;
2. Make sure that your Phone is having good signal reception
 Unable to make outgoing calls:
1. Make sure that the numbers you dialed are not restricted;
2. Make sure that your Phone is having good signal reception
 Unable to receive SMS: Make sure that your Phone’s memory is not full for storing
SMS. If the memory is full, please empty inbox.
 REMEMBER: you can always use “Load Default” sub-menu in “Security” menu to
reset your Phone to its default setting.
 While charging the battery, DON’T disconnect the charger before the battery is fully
charged.
Confirm Password
****