User's Manual

Fixed Wireless Phone
15 User Manual
Before entering security menu, you will be prompted to input a valid
password. The default password is set to 0000. You can change this
password once you enter the security menu successfully. Please remember
your password if you change it. Forgetting the password may require you to
contact the service provider.
Figure 16 Security-1 Figure 17 Security-2
Figure 18 Security-3
a) Switch Mode: This menu is used to change network setting. Only service
provider is authorized to change this setting.
b) PIN Management: This menu allows you to enable/disable PIN and
change PIN. This is ONLY used when R-UIM is used.
Figure 19 Pin Management
c) Restrict Incoming Call: You can enter up to 10 phone numbers for
restricted incoming calls.
d) Restrict Outgoing Call: You can enter up to 10 phone numbers for
restricted outgoing calls.
e) Change Password: You can change your security password through this
menu. Remember the password after changing it.
f) Set Keypad Password: You can change your Keypad locking code. The
default is 0000. Once this is set and Keypad is locked, each time before
using the phone, the Keypad password must be entered.
g) Load Default: This menu lets you reset your Phone with the default
setting same as the default manufacture setting. This is very important
feature. For the case that when you think that your Phone is not working
the way as you expected, you can always use “Load Default” to reset
your Phone to its default setting.
4. Call Setup: This menu allows you to set call answer mode, which includes:
a) Auto Answer: Allows you to answer incoming calls automatically.